Diffusion Alloys: Placeholder Banner

The requirements placed on electrical generators are changing as renewable energy technologies develop and industrial applications seek more efficient ways to generate and recover power. From onshore and offshore wind turbines to tidal energy systems and industrial waste heat recovery, generator design plays an important role in determining the performance, efficiency and overall cost of a power generation system.

Traditional radial-flux generators remain widely used, but alternative architectures are creating new opportunities for generator developers and manufacturers. Axial-flux Permanent Magnet Generators (PMG’s) offer a different approach, combining a compact construction with flexibility in generator configuration, magnetic materials and drivetrain design.

GreenSpur specialises in designing and optimising bespoke axial-flux PMG, primarily for wind energy applications. Our technology is adaptable to a wide range of power requirements, from kilowatt-scale systems to multi-megawatt applications, with generator designs tailored to individual customer requirements.

By combining specialist axial-flux PMG technology with bespoke engineering and design services, GreenSpur supports customers developing power generation solutions for wind, hydro and industrial applications.

Understanding Axial-flux Permanent Magnet Generators
Axial-flux PMG’s differ from conventional radial-flux designs in the orientation of their magnetic field.

In a radial-flux generator, the magnetic field travels radially between the rotor and stator. In an axial-flux PMG’s, the magnetic field is aligned along the axis of rotation.

 

This arrangement allows axial-flux PMG’s to use a flatter, disc-shaped configuration; this offers opportunities for more compact and lightweight generator designs, with increased power density and flexibility of design across different applications.

Bespoke Generator Design for Different Applications
No two power generation projects are the same: turbine configuration, power curves, operating environment, available space, torque, generator weight and project budget can all influence the design.

For this reason, GreenSpur develops customised generator solutions rather than relying on a single standard configuration.

Each project begins with an assessment of the customer’s technical and commercial requirements. This provides the foundation for developing a generator design that considers the wider application, including structural integration, thermal performance and manufacturing requirements.

GreenSpur uses in-house developed multi-physics simulation software and engineering methodologies to assess generator designs and connect theoretical performance with practical application.

This approach allows different design considerations to be evaluated together, helping establish an appropriate configuration for the intended operating conditions.

The company’s design services also incorporate design for manufacture, cost analysis and supply-chain support for those customers who choose to manufacture axial-flux PMG’s at their preferred supply chain partner(s). These considerations are important when developing generator designs that need to be practical to manufacture as well as technically suitable for their intended application.

Magnet technologies
Ferrite and Rare-Earth Magnets: Flexibility in Material Selection
Magnetic material selection is an important part of permanent magnet generator design. The materials used influence the generator’s performance, dimensions and weight, as well as flexibility in supply chains for magnetic materials.

GreenSpur offers flexibility through its proprietary magnet construction technology, allowing generator designs to incorporate either ferrite magnets or rare-earth magnets, or one of many new magnet materials being developed.

Ferrite magnets
Ferrite magnets provide a cost-effective alternative to rare-earth materials particularly where supply security is of concern. They are widely available and do not rely on the supply chains associated with materials such as neodymium, praseodymium and dysprosium.

GreenSpur offers ferrite-based generator solutions for customers looking to reduce reliance on rare-earth materials and develop more sustainable power generation systems.

Rare-earth magnets
For applications where high power density and lightweight construction are priorities, GreenSpur also offers generator designs incorporating rare-earth magnets (e.g. neodymium).

Rare-earth magnets provide high magnetic energy density, making them neodymium suitable for applications where strong magnetic performance is required within a relatively compact design.

New gap material magnetic materials
Emerging ‘gap’ magnets, which sit between ferrite and rare-earth in performance, offer a further option. Gap magnets has been of interest to the supply chain, looking to replicate the performance of rare-earth while reducing the environmental footprint within supply chains or even supply chain restrictions.

Axial-flux architecture lets GreenSpur and its customers easily change the materials of construction while maintaining maximum efficiency, without changing the underlying design platform.

Which magnet to use?
The choice between ferrite, rare-earth and intermediate gap-magnets depends on the requirements of the individual project and the customer’s preference. Power density, weight, cost and material availability all need to be considered when selecting the most appropriate configuration.

The flexibility of GreenSpur’s axial-flux PMG architecture means it can easily accommodate a range of magnetic materials.

Coil technologies
Aluminium windings
The electrical conductor material used within a generator is another important design consideration. GreenSpur’s advanced stator construction incorporates aluminium coils rather than conventional insulated-copper wire, alongside an ironless core. The move to aluminium comes with several measurable advantages:

·       Reduced weight: the switch to aluminium increased the conductive material packing factor from 65% (with enamel-coated copper) to 96% with aluminium, which is a less dense material. The weight saving is more than 50% for the same performance.

·       Thermal management: coil materials without enamel-based insulation can be cooled more effectively, leading to air-cooled generator designs.

·       Supply chain security: aluminium is abundant in the supply chain.

Ironless core
GreenSpur’s resin-bound construction eliminates iron in the stator. The removal of non-essential ferromagnetic materials in the stator reduces the iron-losses to near zero, contributing to improved electrical efficiency at low and high speeds.

These features form an important part of GreenSpur’s approach to developing compact, efficient and cost-effective axial-flux PMG’s.

Direct-Drive and Geared Generator Configurations
The drivetrain arrangement is critical consideration when designing a generator for a specific application.

GreenSpur’s axial-flux PMG technology can be configured for both direct-drive and geared arrangements, including mid-speed geared options.

In a direct-drive configuration, the generator is connected directly to the turbine or mechanical power source. In a geared configuration, a gearbox is incorporated into the drivetrain to provide a different rotational speed at the generator.

The most appropriate arrangement depends on the requirements of the wider system.

Factors such as turbine rotational operating speed, torque, generator dimensions, project costs and the intended application all influence the choice.

GreenSpur’s flexible generator architecture allows customers to consider different drivetrain options when developing their power generation systems.

This is particularly relevant in wind, or run-of-river, or tidal energy applications, where turbine configurations and operating conditions can vary considerably.

Applications in Onshore and Offshore Wind
Wind energy is GreenSpur’s primary area of focus, and its axial-flux PMG technology has been developed for both onshore and offshore applications.

Onshore wind
GreenSpur designs generators for conventional Horizontal Axis Wind Turbines (HAWTs), as well as emerging Vertical Axis Wind Turbine (VAWT) configurations.

Its multi-stage, stackable generator architecture provides scalability across different turbine sizes, from smaller distributed energy projects to larger wind installations.

The company’s designs also incorporate simplified concentrated coils and an optimised passive cooling architecture, which are important features in reducing design complexity and service and maintenance costs.

Offshore wind
Offshore wind applications place particular demands on generator design because of the marine operating environment and the importance of equipment dimensions and weight.

GreenSpur’s axial-flux PMG designs are well suited to offshore applications, including floating wind turbines, where weight, volume and power density are important considerations.

GreenSpur’s axial-flux PMG architecture is suitable for direct-drive, mid-speed and high-speed geared turbines.

Hydro Energy Applications
GreenSpur also applies its axial-flux PMG expertise to hydro applications such as run-of-river and tidal energy systems.

Hydro turbines operate in challenging ‘wet’ environments, where generator design must take account of operating conditions, available space, weight and corrosion resistance.

GreenSpur develops generator designs for both floating and seabed-fixed turbine systems.

The company also offers direct-drive and mid-speed geared configurations, with the choice depending on the balance between generator size, cost and performance required by the project.

Corrosion-resistant materials and coatings are incorporated into its designs for subsea conditions, with the aim of supporting durability and reducing maintenance requirements.

GreenSpur works with hydro-energy developers to create bespoke generator solutions tailored to individual turbine designs and operational requirements.

Industrial Power Generation and Waste Heat Recovery
Although wind energy remains GreenSpur’s primary focus, its axial-flux PMG design expertise also extends to industrial applications.

GreenSpur’s generator architecture can also be used in waste heat recovery, distributed energy systems, industrial cogeneration and specialised industrial processes.

One application is Organic Rankine Cycle (ORC) systems, where generators can be integrated into systems that convert recovered heat into electricity.

In regions where gas-turbine-based electricity generation is common, axial-flux PMG are highly efficient, which is important given the cost of fossil fuels.

This flexibility allows GreenSpur’s axial-flux PMG technology to be considered beyond conventional wind energy applications.

Working with GreenSpur on Your Generator Design
Developing an effective generator requires consideration of the complete application, rather than focusing on individual components in isolation.

GreenSpur’s approach begins with understanding the customer’s technical and commercial requirements before developing a suitable generator configuration.

Its design services incorporate multi-physics simulations, engineering assessment, design for manufacture, cost analysis and supply-chain support.

By considering manufacturing requirements alongside technical performance, GreenSpur aims to develop generator designs that are practical to produce and suited to their intended applications.

The company works with partners across wind energy, hydro energy (run-of-river and tidal) and industrial power generation, providing customised generator designs based on the requirements of each project.

Whether the objective is to develop a generator for an onshore wind turbine, an offshore installation, a tidal energy system or an industrial power recovery application, GreenSpur offers specialist axial-flux PMG design expertise to support the development process.

Developing the Future of Power Generation
Axial-flux Permanent Magnet Generators offer flexibility in generator architecture, magnetic material selection, stator construction and drivetrain configuration.

These characteristics provide opportunities across a range of power generation applications, from renewable energy systems to industrial power recovery.

GreenSpur focuses on developing and optimising bespoke axial-flux PMG designs that address the specific requirements of each customer.

Through GreenSpur’s expertise in axial-flux PMG technology, proprietary magnet construction, aluminium stator design and engineering support, GreenSpur help’s customers explore generator solutions tailored to their applications.

If you are developing a wind, tidal or industrial power generation project and require a bespoke generator design, contact GreenSpur to discuss your requirements and explore the possibilities of Axial-flux Permanent Magnet Generator technology.

More Diffusion Alloys News